Tamarack Solar Horizontal Pole Mount Modules - 2 Pole
Tamarack Solar Horizontal Pole Mount Modules - 2 Pole NEW from Tamarack Solar! Newly designed, economy horizontal pole mounts can be used to mount up to 6 solar panels in portrait orientation. The PGRM series pole mounts are suitable for wind speeds up to 115 MPH. Higher wind locations would need a second vertical pole mount. (*Due to varying site conditions, mounting poles are NOT included, and must be supplied by the user.)
PORTRAIT ORIENTATION MOUNT FOR MODULES WITH A SQUARE FOOTAGE OF 24.78 OR LESS
Top of Pole – Portrait Orientation (PGRM)
The popular PGRM Mounts are designed for up to 6 modules per mount in portrait orientation. Available tilt angle ranges from 0° to 90° and allows easy seasonal adjustability. Use for modules with a minimum length of 35.5-inches and a maximum sq. footage of 24.78. Clamp attachment uses the lip on the back of module frame and accommodates frame thickness between 1.18-inches and 2-inches. Rated for windspeeds up to 115 MPH. Install up to 92 square feet of modules on a single 4” Schedule 40 pole and up to 130 square feet of modules on two 4” schedule 40 poles.
What's Included?
- 1 x Cap, 4" Pipe
- 2 x GALV Steel U-Bolt 1/2-13 3" PIPE
- 2 x U-Bolt Clamp, 3" Pipe 1/2" U-Bolt
- 4 x Washer, Flat 1/2 Galv
- 4 x Washer, Lock 1/2 Galv
- 4 x Nut, 1/2-13 HDG
- 4 x Steel Square Head Cup Point Set Screw 1/2"-13 Thread, 1.5" Length MECH GALV
- 4 x NUT, JAM 1_2-13 GALV
Tamarack Solar Horizontal Pole Mount Modules - 2 Pole Features
- Can mount up to 6 solar panels with frame thickness between 30-50 mm (1.18 - 2 in)
- Square footage of mount can be up to 92 sq ft on a single 4" schedule 40 pole, and up to 130 sq ft on two poles
- Designed for wind speeds up to 115 MPH, with higher wind locations needing to add an additional vertical pole
- The two pole version is necessary when mounting 5 or 6 60 or 72-cell modules
- Tilt angle can be easily adjusted from 0 to 90 degrees, on a seasonal basis, to get the most production
- Mounts ship UPS ground
- Simple one-person installation and adjustment
- Schedule 40 pipes for the 4" vertical and 3" horizontal mounting poles are NOT included and must be supplied by the user*.
- 10 Year Warranty
*NOTE: Calculation of the required horizontal beam length (L) in inches: L = 5 + (Q * W) + ((Q - 1) x 1.28). (Q = number of modules and W = module width in inches).
Not included with PRGM Mount: 4” schedule 40 steel pipes for vertical poles and a 3” schedule 40 steel pipe for the horizontal beam.